VQ30DET Forums
http://vqturbo.com/

vq30det e36 bmw
http://vqturbo.com/viewtopic.php?f=4&t=23
Page 1 of 1

Author:  vqbmw [ Sun Mar 22, 2015 5:25 pm ]
Post subject:  vq30det e36 bmw

Hi guys,
project to start soon will be a vq30det out of anissan leopard
into a 318i e36 bmw

Parts I got so far are :
1997 bmw e36 (good start. :D )
Engine and gearbox
Q45 airflow meter

parts needed:
Ecu and engine harness ( will vq30 maxima work?)
Nistune board and software
Shift kit for auto
bigger diff
vq pathfinder sump and oil pick up

Author:  unkn0wn [ Fri Apr 03, 2015 12:45 pm ]
Post subject:  Re: vq30det e36 bmw

G'day and welcome !

Do you have any picture of your build? allways good to see a VQ going somewhere.

Im not sure if the maxima loom would work, one might assume it would be close....
You might be able to pickup a loom from an importer? I recently got another loom after losing mine..hahahaha

Author:  vqbmw [ Sat Apr 04, 2015 7:11 pm ]
Post subject:  Re: vq30det e36 bmw

Attachment:
photo 1.jpg
photo 1.jpg [ 128 KiB | Viewed 28328 times ]

Attachment:
photo 2.jpg
photo 2.jpg [ 199.13 KiB | Viewed 28328 times ]

Attachment:
File comment: Bit of damage to repair
photo 3.jpg
photo 3.jpg [ 109.44 KiB | Viewed 28328 times ]

Attachment:
File comment: Vh45 airflow meter
photo 4.jpg
photo 4.jpg [ 87.73 KiB | Viewed 28328 times ]


will post pics of motor soon

Author:  VQ30DETR31 [ Sat Apr 04, 2015 8:32 pm ]
Post subject:  Re: vq30det e36 bmw

welcome mate... this should be a good conversion. looking forward to pictures

Author:  GUN180 [ Wed May 13, 2015 4:24 pm ]
Post subject:  Re: vq30det e36 bmw

From research I did while doing my conversion I've found that a lot of the sensors etc. are the same from VQ30de to VQ30det... the loom would probably be designed a bit differently to suit the east-west layout of the engine in that car though...
I cant say for certain, but if you can get one cheap enough it could probably be modified to suit your build ;)

I look forward to seeing more of your build 8-)

Author:  vqbmw [ Wed Jun 17, 2015 7:24 pm ]
Post subject:  Re: vq30det e36 bmw

Came across something the other night when I was looking for something for my 180sx. It showed a32 maxima and r34 and vg30dett as same pin outs and plug for ecu. Does this open up the opportunity to run vg30dett power fc and loom.

Author:  30ED32 [ Thu Jun 18, 2015 1:46 pm ]
Post subject:  Re: vq30det e36 bmw

the ecu plugs for vg or rb to vq aren't anything alike

Author:  vqbmw [ Thu Jul 02, 2015 6:34 pm ]
Post subject:  Re: vq30det e36 bmw

Thanks 30ed32,
So vq maxima ecu and harness with a nistune it is then

Author:  vqbmw [ Thu Apr 19, 2018 2:31 pm ]
Post subject:  Re: vq30det e36 bmw

anyone got a wiring harness and ecu to suit a y33 vq30det in Australia ?

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/